首先需要了解监控用到的线材,普通监控摄像头用到:视频线和电源线。网络监控摄像头用网线,直接POE供电。对于距离远的不管模拟还是网络监控摄像机,都需要光纤。我们监控工程多采用单模光纤。
First of all, we need to understand the wire used for monitoring.
The common surveillance cameras are used for video and power lines. The
webcam is powered by direct POE. For far away, no matter analog or
network surveillance cameras, optical fiber is needed. We monitor the
project mostly using single mode fiber.
下面说说各种线材。
Here are all kinds of wire.
通常模拟监控用的视频线,就是同轴电缆,用来传输模拟视频信号。型号通常有SYV75-3,SYV75-5,这两种规格线径不同,传输距离也不一样。75-3传输距离200米左右,75-5传输距离500米左右,再远的距离建议用光纤。
Usually the video line used for analog monitoring is coaxial cable,
which is used to transmit analog video signals. The models usually have
SYV75-3 and SYV75-5. These two specifications have different line
diameters and different transmission distances. 75-3 the transmission
distance is about 200 meters, the 75-5 transmission distance is about
500 meters, and the farther distance is recommended to use optical
fiber.
The power line used for monitoring and control generally uses the
two core lines of RVV2*1.5, RVV2*1.0 and RVV2*0.5, and the RVV wire is
fully called the copper core PVC insulated PVC sheath soft wire,
commonly known as the soft sheath line, and is a kind of sheath line.
Generally choose the diameter of the power cord according to the
distance and power.