一、设备:路由器,硬盘录像机,摄像头,小交换机，示器;
1、 Equipment: router, hard disk video recorder, camera, switchboard, indicator;
二、过程:
2、 Process:
1、实时监控:每个摄像头安置好后,通过网线全部连到小交换机上;小交换机再通过网线连到硬盘录像机上;硬盘录像机通过数据线连到显示器上实时监控就完成了,可以通过显示器看监控画面,也可以回放,没有网络也没问题;
1. Real time monitoring: after each camera is installed, all the cameras are connected to the small switch through the network cable; the small switch is connected to the hard disk video recorder through the network cable; the hard disk video recorder is connected to the display through the data line, and the real-time monitoring is completed. The monitoring picture can be viewed through the monitor, and can be played back, without the network, there is no problem;
2、远程监控:前提必须有网络;第一步:先设置路由器,以管理员身份进到路由器管理界面,把路由器的IP地址改为192.168.1.1或者192.168.2.1 ;可以通过手机扫描路由器上的二维码,下载管理用户路由器的APP ,再进入管理界面修改即可;第二步:重启硬盘录像机,开机画面会提示有下载软件APP的二维码和设备号的二维码;扫描软件二维码，下载监控软件APP ;再扫描设备号二维码,记下设备号;第三步:通过网线，把路由器和小交换机连起来;第四步:打开下载的监控软件APP ,完成相关注册,在添加设备栏里面找到添加设备号这一项,把刚才记下的设备号输进去后,再把必要的一些信息填进去,更新一下,监控画面就会出现在手机上。
2. Remote monitoring: there must be a network; step 1: set up the router, enter the router management interface as an administrator, and change the IP address of the router to 192.168.1.1 or 192.168.2.1; scan the QR code on the router through the mobile phone, download the app for managing the user router, and then enter the management interface to modify; step 2: restart the hard disk video recorder, The boot screen will prompt you to download the QR code of software app and the QR code of device number; scan the QR code of software to download the app of monitoring software; scan the QR code of device number to record the device number; step 3: connect the router and the small switch through the network cable; step 4: open the downloaded monitoring software app, complete the relevant registration, and find the item of adding device number in the add device column, Input the device number just recorded, then fill in the necessary information, update it, and the monitoring screen will appear on the mobile phone.